Check Out Black Friday Deals! Free shipping, amazing gifts, discounts, and more!

Engineering parts
printed in‑house

CORE One L+From $1,999

Mass-produce customized jigs & fixtures from super-tough materials. Protect your designs with best-in-industry security & offline-first approach.

In-House Manufacturing with 3D Printing

  • Engineers

    Designs without waiting for vendors.

  • Sourcing

    Make parts just in time.

  • Manufacturing

    Never stop your manufacturing line.

  • Security

    Keep IP under your roof.

Six Ways the CORE One L+ Makes Production More Effective

A fully enclosed CoreXY printer with a 30-litre (300×300×330mm) build volume and an actively heated chamber that goes up to 60°C. Ready for demanding 24/7 production, easy onboarding, simple to scale up. Arrives assembled and pre-calibrated.

person with printer

Massive Prints

Housings, manifolds and layup tooling that used to be printed in sections and glued together can now come off the plate as a single piece. That means fewer joints and fewer extra tolerances to design around.

printed part

Engineering Materials

With the optional HT Hotend, the printer reaches up to 400°C to tackle professional, demanding materials for jigsand fixtures that won't break under load.

person taking printer out from box

Ships Assembled & Calibrated

It ships assembled. It detects whether it is on 110 V or 230 V from the mains waveform and reconfigures the heatbed automatically, so the same printer works in the US and in Europe.

soldier inspecting printed part

The Most Secure 3D Printer

No forced cloud, no phone-home, no online firmware updates. Connection is optional, Wi-Fi can be remoed. You're buying the hardware, not a license to use it. Software is open-source, ready for your security audit.

print farm

Excellent Track Record

We run a massive print farm with hundreds of 3D printers, 24/7 - and our machines are built to withstand that load. Thousands of companies across the world choose Prusa for its reliability, repeatability and easy of use.

factory assembling 3D printers

The Fastest Onboarding

The CORE One L+ does not need a thick operation manual or lengthy training. Simple touchscreen interface, bulletproof operation. You can get started in minutes after unpacking.

What the CORE One L is built for

The 30-litre volume is large enough for enclosures, manifolds and layup tooling as a single piece. You skip the gluing, the extra tolerances, and the finishing step that used to go with it.
A part printed across the full width of the CORE One L print sheet

Why Choose Prusa?

American-European company with manufacturing in Wilmington and Prague. Everything we do, we do in-house - including the production of our own electronics on our SMT line. The entire production chain is under our control.

SMT
Country of origin (COO)

Designed, Built, and Tested in the EU and USA

Open-Source Firmware
ISO 9001, ISO 14001, ISO 45001 certified
TAA and NDAA Compliant
24/7 tech support
No material vendor lock-in
60 day money back guarantee
Online 3D training with certification included

Trusted by 110,000+ businesses worldwide

Designed for companies that need high reliability and data security.

Siemens
Lockheed Martin
Ford
Boeing
Volkswagen
University of Texas

“There is a real risk that data on prints, design models, or production processes could be transmitted to servers beyond the user’s control, including to the territory of the PRC.”

2025 - NÚKIB (National Cyber and Information Security Agency)

Prusa is the secure option

95% of desktop 3D printers sold are made by Chinese companies. Prusa is the remaining 5%. Does origin matter? Yes.
All Chinese companies are required to cooperate with state intelligence (National Intelligence Law, 2017), hand over encryption keys (Cryptography Law, 2020), and provide data to authorities regardless of where it's stored - even on EU or US servers (Data Security Law, 2021). Product designs and 3D models a legitimate target too (2023 Counter-Espionage Law update).

CORE One L+ is TAA compliant, which is required for US government and federal contractor purchases.

Certificates and compliance

ISO certificates, declarations of conformity, warranty terms, and a few items we issue on request.

ISO 9001, 14001 and 45001

Quality, environmental and occupational health management - all audited.

CE and UKCA

Designed and manufactured in the EU and USA, including our own PCB production in Prague, TAA and NDAA compliant for government and defense procurement.

Built in Prague and in Delaware

The entire production chain is under our control. We even make our own electronics on our own PCB line.

Letters of volatility

Available on request if you need to document what the printer stores and what a power cycle clears.

One‑year warranty for businesses

60-day refund policy, 2-year warranty in EU, 1 year in the USA. 24/7 tech support in seven languages with real experienced operators in EU & USA - no AI bots.

Five years of spare parts

Guaranteed from the date of release. Every mechanical part is sold separately and nothing is glued shut.

“Siemens has selected Prusa as a trusted partner and preferred supplier of professional-grade 3D printers for manufacturing aids and prototypes production. We greatly appreciate Prusa's reliable data handling, printing performance and durability.”

Christian OchsHead of Additive Manufacturing, Siemens Mobility

Your files stay on your network

Every connection on this machine is optional.

Air‑gapped machine with zero forced cloud

Protect your designs and take your workflow offline. Everything can be updated without internet connection after your careful security audit. The software is fully open source, firmware updates can be performed using a USB drive.

  • Removable Wi‑Fi Module

    For air-gapped operation

  • Ethernet is optional

    No forced online setup, no apps

  • Fully offline setup and operation

    The printer does not phone home.

  • Disconnect & Remove the camera

    For 100% privacy

Customer stories

These teams already run our printers in production.

Browse all stories
One of Škoda Auto’s 3D printing farms

Customer story Škoda Auto

A printer farm went into the welding plant in Mladá Boleslav after maintenance staff, who already print at home, brought the idea to their supervisors. Printed clamps fully replaced the metal ones, and Central Technical Service basically stopped buying spare parts and started printing them instead.

  • 13,000+car deliveries saved from delay
  • 35,000+employees
  • 60+3D printers across the plants
“Cooperation of Škoda Auto and Prusa Research changed our way of thinking about production.”
JPJana Polášek FilováExpert Coordinator for Digitisation and Innovation in Production and Logistics, Škoda Auto
Škoda Auto logo
1 / 7

Everything from One SupplierFrom materials to software

We offer a convenient interconnected ecosystem for seamless workflow. However, everything is optional and there are no vendor locks. You can use any 1.75mm filament and third-party software if you like.

Consumables and spares

Spare print sheets, nozzles and a maintenance kit. Worth ordering with the printer so you have them on hand for the first service.

UpgradesAdd these later, without replacing the printer

HT Hotend, 400 °C

A tool-less swap that takes under a minute and opens up PEKK-CF, PPS-CF, PPSU, PPA and PPA-CF. It also improves layer adhesion on materials the machine already prints: parts in ASA, PA, PA11 and PETG come out up to 30% stronger. The same swap fits every CORE One and CORE One L you already own.

The HT Hotend upgrade for the CORE One and CORE One L

Advanced Filtration System

A HEPA element rated at 99.9% for ultra-fine particles and an activated carbon filter for VOCs, on a high-pressure blower, with the fans under firmware control. The HEPA element lasts at least 600 hours of runtime. Fitting it is what qualifies the machine for ABS, ASA, HIPS and PA.

The Advanced Filtration System fitted to a CORE One enclosure

Chamber exhaust into building HVAC

The chamber has an exhaust port. Duct it into building extraction instead of filtering at each machine — useful when you have several printers in one room. The top vent opens and closes itself depending on the material.

The actively heated chamber of the CORE One L

Sealed, heated filament storage

Nylon and polycarbonate pull moisture out of the air and print badly once they have. The USS Drybox feeds the printer directly from a sealed chamber, which often decides whether a qualified material prints well or not.

The Prusa USS Drybox filament storage unit

Materials

Materials that print as delivered, plus what you get with the filtration system and the HT Hotend. Any 1.75 mm filament works — no approved-vendor list, no chipped spools.

PETG

Easy to print

The default for jigs, fixtures, housings and general shop-floor parts.

As deliveredChemical resistant

PC Blend Carbon Fiber

Advanced

About 114 °C, and up to 130 °C after annealing, with under 1% shrinkage. Needs a hardened nozzle.

CompositeStiff

PA11 Carbon Fiber

Advanced

Serviceable to about 190 °C and resistant to fuels, solvents and motor oils. Needs the filtration system, a hardened nozzle and the PA Nylon sheet.

Filtration requiredComposite

ASA

Moderate

UV stable to about 93 °C, for parts that live outdoors. Needs the Advanced Filtration System fitted.

Filtration requiredUV resistant

PETG V0

Moderate

Self-extinguishing, co-developed with Knorr-Bremse for rail. Note that its UL 94 V-0 certification is issued for specific printer and profile combinations, so check yours before you rely on it.

Flame retardantRail

TPU 95A

Moderate

Gaskets, dampers, grips and compliant fixtures. A physical switch on the filament sensor sets a low-resistance path for flexibles.

As deliveredFlexible

PPS‑CF

Advanced

Chemical resistance, flame retardancy and stiffness, used in automotive and fluid handling. Needs the 400 °C HT Hotend.

HT Hotend requiredChemical resistant

PPA‑CF

Advanced

Stiff, with low thermal expansion, for demanding jigs and fixtures. Needs the 400 °C HT Hotend.

HT Hotend requiredComposite

PP, CPE, PVB, PVA and Flex

Easy to print

Polypropylene, copolyester, polyvinyl butyral, soluble support and flexible filament all print without the filtration system.

As delivered

Material compatibility

With the Advanced Filtration SystemABS, ASA, HIPS, PA and more
Show the full list

CORE One L, CORE One+ and XL

How the CORE One L compares with the CORE One+ and the Original Prusa XL.

CORE One LCORE One+Original Prusa XL
Build volume300 × 300 × 330 mm250 × 220 × 270 mm360 × 360 × 360 mm
Enclosed as standardyesyesno
Actively heated chamber60 °C55 °Cno
Max nozzle temperature290 °C290 °C290 °C
Max heatbed temperature120 °C120 °C120 °C
HeatbedCast AC convection, dual-loopMK52 24 VSegmented, 16 zones
Toolheads11Up to 5, automatic changing
Available as a kitnoyesno
Best suited toLarge enclosed engineering partsEnclosed engineering parts on a smaller footprintMulti-material, and the largest single parts

Build volume

CORE One L
300 × 300 × 330 mm
CORE One+
250 × 220 × 270 mm
Original Prusa XL
360 × 360 × 360 mm

Enclosed as standard

CORE One L
yes
CORE One+
yes
Original Prusa XL
no

Actively heated chamber

CORE One L
60 °C
CORE One+
55 °C
Original Prusa XL
no

Max nozzle temperature

CORE One L
290 °C
CORE One+
290 °C
Original Prusa XL
290 °C

Max heatbed temperature

CORE One L
120 °C
CORE One+
120 °C
Original Prusa XL
120 °C

Heatbed

CORE One L
Cast AC convection, dual-loop
CORE One+
MK52 24 V
Original Prusa XL
Segmented, 16 zones

Toolheads

CORE One L
1
CORE One+
1
Original Prusa XL
Up to 5, automatic changing

Available as a kit

CORE One L
no
CORE One+
yes
Original Prusa XL
no

Best suited to

CORE One L
Large enclosed engineering parts
CORE One+
Enclosed engineering parts on a smaller footprint
Original Prusa XL
Multi-material, and the largest single parts

Documents and further reading

Firmware, documentation, material guides and related product pages.

Still choosing?

Guides and overview pages if you are still comparing options.

How to choose a 3D printer

A buying guide for choosing a 3D printer.

Read the guide

3D printing for manufacturing

Prototyping, tooling, end-use parts and spare parts on the shop floor.

See the applications

3D printers for enterprise

CORE One+, CORE One L, Original Prusa XL, Pro HT90 and the AFS farm system, side by side.

Compare the range

Frequently asked questions

Prusa CORE One L+from $1,999Buy nowBuy