Hardened steel nozzle E3D V6 0.4 mm
This product includes:
- Hardened steel nozzle E3D V6 (1 pcs)
- Material: Hardened steel
Hardened steel nozzle is recommended for printing abrasive filaments, which wear out the standard brass nozzle very quickly.
Most of the abrasive filament are composites, plastics with something mixed in. Some examples are Bronzefill, Brassfill, filaments with carbon compound, Glow in the Dark filaments and so on. Always ask your filament vendor if you are not sure. Keep in mind, hardened steel has different thermal conductivity properties than brass. Due to that, you may need to adjust your printing setting and increase hotend temperature by about 5°C to print successfully with the hardened steel nozzle.
Read more about different nozzle diameters and their usage at PrusaPrinters.org.
To replace the part/s, please consult our Assembly Manuals. Make sure to follow the manual for your printer model.
I never managed to use it and not MMU compatible. I give it to anyone who wants it. ................ -I spent a lot of time making adjustments, but I couldn't get a proper printout, unusable. - MMU: when the filament is expelled, it makes a big ball, and it gets stuck every time in the Mmu's tubes, you have to change the tube. Problem that I have only with the steel nozzle, not the brass one.
Used nozzle for several months now, perfect printing, a little time of adaptation may be necessary for beginners.
Poor quality No setting on Prusaslicer, destroys prints