3DXTech ThermaX PSU Natural 500g

ThermaX™ PSU [Polysulfone] is a high-temperature amorphous polymer that offers excellent mechanical, thermal, and chemical resistance properties.

Basic Attributes

• Very high thermal properties superior to Ultem™ 9085
• Excellent hydrolytic resistance
• High Environmental Stress Crack Resistance (ESCR)
• Sterilization capable, including EtO gas, radiation, steam autoclaving, plasma, dry heat and cold sterilization
• Exceptional strength and modulus, even at elevated temperatures
• Outstanding impact resistance
• Highly resistant to even large (10 Mrd) doses of gamma radiation
• Resists most common automotive fluids including gasoline, antifreeze, transmission fluids, motor oils, power steering fluid, windshield washer fluid (ESCR, 24 hrs, 100°C)
• Inherently flame retardant with low smoke evolution and low smoke toxicity
• Excellent dimensional stability with low creep sensitivity, low and uniform coefficient of thermal expansion, and highly reproducible part-to-part dimensions.

Printing Setup

• Extruder: 350-380°C
• Bed Temp: 140-160°C
• Other: No cooling fan and print speeds of 16 mm/s as a starting point.
• Heated Chamber: Recommended
• Drying Instructions: 120°C for 4 hours.