I've never owned a 3D printer. Is this too much machine?

The XL+ does all the demanding parts itself and some user assistance is required only during the first-time calibration. Otherwise, the operation is nearly the same as our other printers. The questions you should be asking: Do I need the print volume of this size? Do I want to combine multiple materials? You can also check the CORE One+ (or L+) INDX with up to 8 toolheads and slightly more compact print volume.

What exactly is new compared to the Original Prusa XL?

Automatic electronic toolhead calibration (replacing the mechanical pin routine), reworked toolhead cooling, a nozzle wiper, stiffer 1.5 mm GT belts, 15-20% higher print speed, and firmware that ships with two years of features developed across all Prusa printers. Build volume, the toolchanger design and material support carry over unchanged.

MMU3, INDX, or the XL+ toolchanger?

MMU3: the affordable single-nozzle filament switcher. Up to five filaments, purge waste, great for color prints on smaller printers. Not suitable for combining various materials. INDX: up to eight materials on the CORE One+ and CORE One L, with induction-heated passive tools and near-zero waste. XL+ toolchanger: five full printheads, minimal purge, the fastest swaps, the biggest volume, and swappable non-FDM tools. If your parts are large or multi-material work is your daily bread, the XL+ is built for it.

Can I start with one toolhead and add more later?

Yes. Every XL+ ships on the same frame with the same electronics. You can upgrade to two or five toolheads.

Do I need an Enclosure+?

Not for PLA and PETG. Most people start there. Add the Enclosure+ when you want large ASA or ABS parts: outdoor fixtures, automotive parts, acetone-smoothable props. Choose the external-heater version (60 °C) for polycarbonate and nylon.

Does it need a cloud account?

No. The XL+ works fully offline. Slicing, printing, firmware updates. Prusa Connect remote monitoring exists and is optional. Your designs stay on your hardware.

Prusa XL+ or CORE One L+?

CORE One L+: enclosed, about 30 l, one material at a time (or up to 8 with the INDX upgrade). A superb single-material workhorse. XL+: 46.7 l, over 50% more volume, and up to five materials in one job.

Prusa XL+ pour les makers

PLA

Easy to print

The easy, everyday starting point. Toys, models, gadgets and quick home fixes. The most forgiving plastic to print, so it's where everyone begins. Prints straight away, no enclosure needed.

Most popularEasy to printGreat-looking

Nozzle210-220 °C

Bed50-60 °C

PETG

Easy to print

A bit stronger and springier than PLA, and happy outdoors. Great for hooks, brackets and water-tight bits that need to take a knock. Prints open, no enclosure needed.

DuctileWater-TightOpen-Air Friendly

Nozzle230-250 °C

Bed70-90 °C

ASA and ABS

Moderate

Handles sun and weather without going brittle. The choice for outdoor parts where PLA would fade. Best with the optional Enclosure+, which keeps it from curling and holds fumes in.

Heat resistantWeather-ProofSmoothable

Nozzle250-265 °C

Bed100-110 °C

PC / PCCF and More

Advanced

About the strongest plastic you can print, shrugging off heat and hard knocks. Needs the warm, enclosed chamber the optional Enclosure+ adds to the XL+.

Top strengthHeat resistantImpact proof

Nozzle270-285 °C

Bed80-120 °C

PA (Nylon)

Advanced

Tough and slippery. Ideal for gears, hinges and parts that carry weight. It soaks up moisture, so keep it in a dry box, and use the optional Enclosure+ to stop it curling.

ToughWear resistantHeat Resistant

Nozzle260-280 °C

Bed80-90 °C

TPU (Flexible)

Moderate

Bendy and rubbery for phone cases, seals and shock absorbers. The direct-drive print head feeds this soft plastic smoothly so it prints cleanly. No enclosure needed.

FlexibleImpact absorbingElastic

Nozzle220-240 °C

Bed50-60 °C