Prezzi in
Spedizione verso
Tutti i paesi
    Carrello

    Polymaker Fiberon PPS-CF10 black 500g

    Parametri
    Loading...
    In magazzino

    Tempo di preparazione: 1-3 giorni lavorativi.

    In magazzino
    $78.61
    Loading...
    $78.61Loading...

    IDF: 28487|IDS: 4508

    Polymaker Fiberon PPS‑CF10Extreme chemical resistance combined with low warping

    Polyphenylene Sulfide (PPS) is a semicrystalline thermoplastic that offers the highest possible chemical resistance. This material is not soluble in any known solvent at temperatures below 200 °C. Plus, the carbon fibers bonded inside the polymer improve its dimensional stability.

    PPS-GF20 print
    PPS-GF20 print

    What makes PPS-CF10 special

    A brief overview of the material's properties

    Perfect chemical resistance

    PPS is not soluble in any known solvent at temperatures below 200 °C. This material resists acids, bases, oils, and fuel.

    High thermal resistance

    PPS is a UL94 V0-certified self-extinguishing material without toxic additives. It offers thermal resistance of incredible 252 °C.

    Low moisture absorption

    PPS absorbs moisture very slowly. The 3D-printed parts don't change their properties or their dimensions when exposed to humidity.

    Printable on CORE One L+All you need is just a few small upgrades

    You don't have to spend thousands on new printers to print high-temperature materials. Our printers are upgradable and versatile. A few small adjustments can turn the CORE One series 3D printers into a whole new product. Plus, we develop and test everything under one roof to bring the best possible results.

    HT Hotend
    HT Hotend

    For nozzle temperature up to 400 °C

    HighTemp print sheet
    HighTemp print sheet

    Providing the perfect layer adhesion

    Advanced Filtration
    Advanced filtration

    To protect your health

    Drybox
    USS Drybox

    Keeps the filament dry for a long time

    Basic Attributes

    • 252 °C thermal resistance
    • Perfect chemical resistance
    • UL94 V0 self-extinguishing filament
    • Low moisture absorption (printed parts don't change dimensions and properties in humid environments)
    • Abrasive material (a hardened nozzle is required)
    • High printing temperatures (HT hotend is required)
    • Large models may be hard to print due to warping

    Technical Parameters

    Nozzle temperature310 - 350 °C
    Heatbed temperature80 - 90 °C
    Recommended steel sheetSatin / HighTemp
    Recommended nozzle0.4 mm hardened nozzle (ObXidian 500)
    Supported Prusa print profilesCORE One+ / (Gen 2), CORE One L / +
    Filament diameter1.75 mm
    Required hardwareHT Hotend
    Filtration systemRecommended

    Tips & Tricks For Beginners

    Everything you need to know before printing

    Recensioni