Introducing the Original Prusa Enclosure: Modular box with advanced features for your MK3S+!

Shipping to
United States
MK3S+ kit shipping from $50 (Fedex)

Prusament PLA Oh My Gold (Blend) 970g

What can you expect?

Prusament PLA is our own in-house made filament. The whole manufacturing process is closely monitored and tested - we guarantee ±0.02mm precision and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com. Check the sample spool!

Manufactured In-House By Josef Prusa

We were not satisfied with the quality of filaments on the market. So we decided to make our own! Prusa Research is the only 3D printer manufacturer with its own filament production.

Premium-Grade Materials And Thorough Testing

The whole manufacturing process is closely monitored and tested – string diameter, color consistency, and mechanical properties – to make sure that every spool is perfect.

± 0.02 mm Manufacturing Guaranteed Precision

We believe the industry standard of 0.05 mm isn’t sufficient for perfect 3D printing. Instead, we guarantee ±0.02mm precision and highly-consistent colors in our filaments.

High Quality You Can Check Yourself

We are the only manufacturer that gives the option to inspect parameters of every filament spool. Scan a QR code on the spool to see all details online (check the sample spool).


 

Read more about Prusament in the article at PrusaPrinters.org or at Prusament.com!

About PLA

PLA melts at a relatively low temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s a hard material, but that also means it’s somewhat brittle, and once it breaks, it likes to shatter. Only this material is proven for 50 microns layer height.

However, PLA is not a perfect material and, just like every other plastic, has some disadvantages. The low melting temperature also means low-temperature resistance. Parts start to lose mechanical strength at temperatures over 60 °C.

The combination of being low in UV and temperature resistance means that it’s not ideal for outdoor use. Also, PLA is only soluble in chemicals like chloroform or hot benzene. So when connecting multiple pieces, you’re better off using just glue.

Even though PLA is on its own food safe, we do not recommend repeatedly drinking or eating from your 3D prints. Because of the small fractures on the print surface, bacteria can build up in there over time. You can prevent this by applying a food-safe coating. When post-processing PLA, it’s better to use wet sanding. Without water, you'll quickly start heating the plastic by friction, which will cause it to soften and make it hard to keep sanding.

Printing Setup

Nozzle 215 °C 
Heatbed 50-60 °C 

Basic Attributes

Easy to print Brittle
Can print tiny parts Low temperature resistance
Can print huge objects Difficult post-processing
Hard and tough    
Low warping    

Notes

This PLA is made in-house by Prusa Research. We chose Natureworks 4043D resin which is the best and most widely used in 3D printing.

1.75 mm filament is manufactured with precision of +- 0.02 mm

Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.

The recommended maximum temperatures of drying for Prusament PLA are 50 °C for a minimum of 4 hours.

Reviews

8 reviews
Log in to add a review
Šárek Petr10 months ago

The aesthetics are absolutely gorgeous. While the filament appears yellow on the spool, the prints have a beatiful vibrant gold shine to them. It's a lot tougher than regular PLA and seems to be less stiff. What surprised me however was that this particular blend does not act like regular PLA at all. It sticks to PEI very well and I've had no layer adhesion issues. Overhangs and bridging however are a different story. Bridges are inconsistent and overhangs curl a lot (so beware). Regardless I will be buying more as soon as I run out.

Kramp Brianlast year

The color is quite shiny for being simply PLA. But comparing this to the Azure Blue, I had to print things with small overhangs at a ridiculously slower speed to prevent curling of overhangs.

Carlstedt Matslast year

This doesn't behave like regular PLA. Its very sticky to your sheet. Eventually it broke my smooth sheet. It is better suited for textured sheet. It's way more flexible than ordernary PLA. The result is fabulous. Very nice looking. Looking at the printer working it seems like the print expands when it cools. A little like when you go to low on z or the flow is to high. Strange, but I want to learn how it works since it is very nice looking. My 3 stars is because it broke my smooth sheet. It should have been told that it is very sticky.

Ask us anything!

Are you considering buying any of our products? Do you have questions about their technical parameters, prices or optional accessories? Feel free to contact us, we're happy to help.