Build volume250 × 220 × 270 mm | 9.8 × 8.6 × 10.6 in
Dimensions without stand580 × 470 × 615 mm (W × D × H), with the door closed
Dimensions with stand600 × 500 × 1320 mm (W × D × H), with the door closed
Weight without / with stand30.5 kg / 41.6 kg
Packaged weight without / with stand55 kg / 66 kg
Power input100–240 VAC, 2.8 A max., 50–60 Hz
Filament diameter1.75 mm
Layer height0.05–0.30 mm
MainboardCustom 32-bit xBuddy electronics with STM32
Stepper driversTrinamic 2130
Stepper motorsPrecise 0.9° X/Y stepper motors to prevent VFA
ExtruderNextruder direct drive, E3D V6 compatible with adapter
Filament pathAluminum heatsink and all-metal hotend
Drive systemNextruder planetary gear system, 10:1 gearbox ratio
Part coolingHigh-performance turbine with 360° cooling system
Installed nozzle0.4 mm hardened nozzle
Maximum nozzle temperature290 °C | 554 °F
Maximum heatbed temperature120 °C | 248 °F
Maximum chamber temperature55 °C | 131 °F
Display3.5-inch 65k-color graphic touchscreen
Firmware updatesUSB drive, Prusa Connect, or Prusa mobile app
Prusa ConnectSupported
Quick-swap nozzle systemSupported
ConnectivityEthernet and Wi-Fi; NFC receiver with optional Wi-Fi module
WLAN standardIEEE 802.11 b/g/n
Filament sensorsTwo sensors
Load-cell sensorYes
Print surfaceMagnetic heatbed with removable PEI spring steel sheets
First-layer calibrationFully automatic using the load cell
Input ShaperSupported
Supported materialsPLA, PETG, Flex, PVA, PC, PP, CPE, and PVB; advanced: ABS, ASA, HIPS, and PA
Installed cameraBuddy3D Camera
FiltrationAdvanced Filtration, installed
Door sensorCan automatically pause printing when the door is opened
Factory calibrationThe printer is delivered fully calibrated
Power supply240 W with Power Panic hardware
Power consumptionPLA: 90 W | ABS: 110 W
Signature Oak dimensions and weights vary depending on whether the optional stand is fitted.