ColorFabb Woodfill filament 600g
Is it for me?
Woodfill is on its base just a regular PLA. But the addition of recycled wood fibers (30%) allows for really interesting natural looks.
Please use corresponding print settings in PrusaSlicer as print parameters can be very different depending on the plastic base.
Woodfill is less abrasive than metal composites, but we suggest using a larger nozzle (0.5 mm and higher).
Printing Setup
Nozzle | 210-230 °C |
Heatbed | 50-60 °C * |
* larger object means higher temperature
Basic Attributes
Easy to print | Needs larger nozzle |
||
No warping |
Prone to stringing |
||
Great look after post-processing |
Notes
This filament is produced by colorFabb.
Length of the filament: 250 m
We suggest to use larger nozzle (0.5 mm and higher) with this filament.
1.75 mm filament is manufactured with precision of +- 0.05 mm
We reserve the right to ship weights +/- 5% due to packaging variations.
Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.
Reviews
The Seller does not verify whether the published reviews come from consumers who have actually used or purchased the products or digital content or service. Reviews are provided by registered PRUSA ACCOUNT users.
Downloads
- Technical Data Sheet100 kB