Shipping to
United States
MK3S+ kit shipping from $50 (DHL)

(NO LONGER OFFERED) BlueCast Phrozen Wax Casting Resin 0,5kg

High-quality UV photosensitive 405nm liquid resin for 3D printing.

Type: casting.

Not compatible with

Is it for me?

BlueCast Phrozen Wax is a professional casting resin. It provides very smooth surfaces ideal for jewelry needs. Objects printed with casting resins are commonly used for making casting molds, because the object can be burned out without leaving an ash residue. Due to its high quality, it is also popular in engineering, architecture and other industries, where is the high quality a must.

Printing Setup

Exposure time 16/50 seconds


Basic Attributes


General use casting resin


Slower solidifying (approx. 16 seconds)


Low viscosity - no preheating required


Not suitable for larger objects


Easier to recover uncured resin from models


Safety Instructions

This resin is not bio-compatible nor approved for use with food, drink, or for medical applications on or in the human body. Always read the safety data sheet.

Do not throw resin bottles (empty or full) into regular waste.

Liquid resins should be treated as dangerous chemicals and you should follow your country’s laws regarding the disposal of dangerous chemicals. There are usually special containers (e.g. oily waste cans) available for public located near gas stations etc.


1. Shake well before using

2. Wear gloves and a respirator before using, avoid direct skin contact

3. Rinse skin with plenty of water in case of an accidental skin contact

4. Not intended for human consumption! Keep away from children and animals.

5. Liquid resins may cause an allergic reaction. Seek medical attention in case you experience discomfort when working with resins

6. Use isopropyl alcohol (90% or higher) to clean printed models.



1 review
Log in to add a review
Rancor William2 years ago

I tried this resin for the first time and the disappointment was not long in coming. The resin after curing does not have the properties of wax and cannot be burned out of the mold. In addition, it has a very low viscosity and flows through the bottom of the tray.


Ask us anything!

Are you considering buying any of our products? Do you have questions about their technical parameters, prices or optional accessories? Feel free to contact us, we're happy to help.

Contact us