Shipping to
United States
MK3S+ kit shipping from $50 (Fedex)
$USD

FilaFlexible40 Red filament 500g

Is it for me?

FilaFlexible40 is elastic, flexible and rubber-like material. On the hardness scale, 40D stands for hard rubber. Whether you need a phone cover, an action camera case or wheels for your RC car, the flexible filament is the way to go.

Hard rubber may be a popular material, however, in some situations, it can be less than ideal or even completely unsuitable. Whether you need a phone cover, an action camera case or wheels for your RC car, flexible is the way to go. The flexible filaments are called TPE (ThermoPlastic Elastomer) or TPU (ThermoPlastic Polyurethane). Compare to normal flexible filaments (TPU or TPE based filaments), FilaFlexible40 has higher resilience (more rubbery), better performance in a wide range of temperatures, easier and more stable printing, higher chemical resistance and also UV resistance.

To successfully print with a flexible filament, first, clean the nozzle of previously extruded plastic. Next, you’ll need to empty the hotend of any plastic left inside. Normal unloading will leave some filament inside and flexible filaments will have a very hard time to extrude. So either do a “cold pull”, where you preheat, insert PLA, set the temperature to 85°C, loosen the idler completely and pull the filament out rapidly. Or alternatively, if you have 1.5mm wire around, you can just preheat and push the filament out with the wire. Before you actually load the filament, loosen the extruder (idler) screws a bit. After that, you’re good to go.

Flexible filaments can bond to the bed too much, especially to smooth PEI. To prevent damage we recommend to use glue on the bed as a separator (you can use the glue stick that we ship with each printer). You can also use the Double-sided Textured PEI Powder-coated Spring Steel Sheet without the glue.

Printing Setup

Nozzle 220 °C
Heatbed 60-75 °C

Basic Attributes

Flexible and elastic

Extra steps when loading filament

Durable printed parts

Can be tricky to print

Good layer adhesion

Strong adhesion to smooth PEI

Notes

This flexible filament with hardness Shore 40D is made by Filatech.

1.75 mm filament is manufactured with precision of +/- 0.03 mm

We reserve the right to ship weights +/- 5% due to packaging variations.

Reviews

1 review
Log in to add a review
Bajkai Tomas6 months ago

It prints very well, does not pull hairlines like other brands in this class. The red is not completely red but rather pink. But otherwise very great satisfaction. I recommend!

Ask us anything!

Are you considering buying any of our products? Do you have questions about their technical parameters, prices or optional accessories? Feel free to contact us, we're happy to help.

Contact us