Shipping to
United States
MK3S+ kit shipping from $50 (Fedex)
$
  • £ GBP
  • $ USD
  • € EUR
  • zł PLN
  • Kč CZK
English
  • English
  • Čeština
  • Deutsch
  • Español
  • Français
  • Italiano
  • Polski

Double-sided Powder-coated Satin Spring Steel Sheet

Double-sided satin powder-coated spring steel sheet for the Original Prusa i3 MK3/S/+ and MK2.5/S

Not compatible with

OVERVIEW:

The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).

Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.

Find more details about the spring steel sheets (including usage and maintenance instructions) in our knowledge base.

WARNING:

Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in our knowledge base.

Note:

Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

ATTRIBUTES

Suitable for both PLA and PETG

Acetone causes the surface to quickly deteriorate

Lightly textured surface finish

Prints from ASA, PC Blend require a brim / skirt / shield around the print

No need for Windex for PETG

Live Z value needs to be readjusted if you switch sheets

No need for glue stick with FlexFill 98A

DO NOT use sharp metal objects (e.g. a spatula) to remove the print!

Wide range of supported filaments, including advanced materials, for instance PC Blend

   

Easy maintenance and good adhesion qualities

   

Reviews

2 reviews
Log in to add a review
Lin Andy
Lin Andy15 days ago

This is the perfect sheet for me. I started with the smooth sheet, then the textured sheet, before getting this. I haven’t had to switch sheets since then! Works great for both PLA and PETG, and you don’t need to prep the surface like you do with the smooth sheet. PLA sticks well too, which it doesn’t always on the textured sheet especially with small contact areas. Do make sure you wait for the sheet to cool down before taking parts off. In most cases, if it’s cooled enough, you don’t even have to take the sheet off and bend it to remove parts!

Collins Amelia
Collins Amelia15 days ago

Super nice sheet. Substantially thinner than the PEI smooth sheet (by about 0.25mm!), so it's time to use those sheet profiles in the firmware to set the Z offset. Needed a first-time clean with isopropanol just to get rid of any dust or residue. The first task for this sheet is instead of the textured sheet to print an LCD cover; this should provide low-glare and a subtle and finished look. Looking forward to printing PC blend on this sheet!

$44.99
Visa, Mastercard, American Express, PayPal, Apple Pay, Google Pay, iDeal, Diners Club, girocard, Sofort, Trustly, DHL, FedEx, Dpd, Packeta, Zásilkovna

Ask us anything!

Are you considering buying any of our products? Do you have questions about their technical parameters, prices or optional accessories? Feel free to contact us, we're happy to help.