Loud noises from printer

When your printer emits loud noises that sound like hammering into a sheet metal, it can be caused by a clogged (flooded) sensor of the tilt mechanism. This can be caused by a firmware issue, or when resin has leaked into your printer through the tilt platform.


Solution: First, check that your firmware is up to date. If you have the latest available version installed and the problem persists, remove the black cover and check whether the sensor under the tilt motor is clean. If there is resin on the sensor then remove it with a piece of paper towel and make sure the sensor is perfectly clean – otherwise, the reading will be affected.