---
title: "Webinar: HT90 × Koenigsegg | 30 Nov 2026"
description: "Free 60-min webinar with Koenigsegg: small-to-mid PEEK, PEKK and ULTEM parts on the Prusa Pro HT90. Mon 30 Nov 2026, 16:00 CET. Recording included."
url: "https://www.prusa3d.com/p/prusa-pro-ht90-koenigsegg-webinar/"
lang: "en"
---

Free webinar · Mon 30 Nov 2026 · 16:00 CET

# Koenigsegg on the HT90 What they print, and how

60 minutes with Koenigsegg on printing PEEK, PEKK and ULTEM parts on the Prusa Pro HT90 – brackets, ducts, fixtures instead of machining stock or waiting on a supplier. Real parts, settings, and what they run day to day.

[Register →](https://zoom.us/webinar/register/WN_K-pljL-wT4asiEiVn7ZhlA#/registration) [All sessions](https://www.prusa3d.com/p/prusa-pro-webinar-series/)

## Mon 30 Nov 2026 · 16:00 CET · 10:00 a.m. ET

Live on Zoom, recording available afterwards.

HT90 × Koenigsegg

Topic

Small-to-mid high-temp parts

60 min

Live session

Including Q&A

Free

Registration

Recording included

## Where high-temp parts usually get stuck

Components like brackets near heat, short ducts, housings that see fuel or cleaners, and production fixtures.

### Outsource it

Send the file out, wait for a quote, wait for delivery. A design change starts the wait again.

### Machine it

Cut from PEEK stock or metal. Most of the material becomes chips; complex shapes cost more.

### Print it in‑house

On an HT90: dry the filament, print in a heated chamber, anneal when needed. Same day iteration for parts that fit the build volume.

## When every gram counts, the part has to be right. Customer story · 15 min

Koenigsegg builds its own components and cuts weight wherever it can. In this session, Kristian Ljungkvist shows how they use the HT90.

> “We don't want to machine away up to 80% of expensive PEEK. Additive manufacturing lets us build only the part we need.”

Koenigsegg uses additive manufacturing from rapid prototypes to production parts.

Kristian Ljungkvist Composite Additive Manufacturing Operator, Koenigsegg

![Koenigsegg](https://assets.prusa3d.com/cdn-cgi/image/width=100,height=100,quality=85,format=auto/https://storage.googleapis.com/prusa3d-content-prod-14e8-asset-manager-prod/0f50ebba-63b8-4437-a5ff-e73fab7e5ee6.png)

![Prusa Pro HT90 delta kinematics inside the actively heated chamber.](https://assets.prusa3d.com/cdn-cgi/image/width=1200,height=900,quality=85,format=auto,fit=scale-down/https://storage.googleapis.com/prusa3d-content-prod-14e8-asset-manager-prod/24378253-966e-4d33-b864-57d39f7b96e8.png)

The technology

### Built around the heat.

Printing PEEK or ULTEM is less about the nozzle and more about everything around it. If the part cools unevenly, it warps and its layers do not bond. The HT90 is designed to keep the whole part at a stable temperature while it prints.

An actively heated chamber

Heated up to 90 °C (194 °F), not just enclosed. The part stays warm while it prints, so high-temperature layers can fuse properly.

A 500 °C printhead

The High-Temp head melts PEEK, PEKK, PEI (ULTEM), PPSU, PSU, PPS and PES. Abrasion-resistant nozzle for filled materials.

Delta motion with the motors outside

Motors stay out of the hot chamber. The light printhead moves fast and stays precise.

A second head for everyday work

Swap to the High-Flow head for PLA, PETG, ABS, ASA, PA or PC. Prototype one day, print the PEEK part the next, on the same machine.

## What changes when the part is printed in-house.

### Hours, not weeks

Design, print, test and change the part the same day, without a purchase order or a supplier queue.

### Lighter than metal

PEEK weighs about half as much as aluminium. Swap a metal bracket or duct for a polymer one and you cut weight.

### Fits a team budget

The HT90 is meant as an affordable way to print PEI and PEKK, without buying a full industrial system.

### Open materials

No lock-in to one filament brand. Use Prusament or another qualified material in PrusaSlicer.

### Your designs stay yours

Full offline mode with USB transfer. No cloud or internet connection required. The Wi-Fi module is removable if you work with sensitive IP.

### Room for real parts

28 L cylindrical build volume, Ø300 × 400 mm (Ø11.8 × 15.7 in). Fits full-size brackets, ducts and fixtures.

## The HT90 on the shop floor

-   HT90 print farm
    
-   Simple operation via touchscreen interface
    
-   High-Temp and High-Flow heads
    
-   Fast prototyping
    
-   Designed for demanding engineering polymers
    

## Webinar agenda: 60 minutes covering hardware, materials and prints.

00-08 · Overview of the session Introduction + HT90 target applications

08-20 · How the HT90 works Heated chamber, 500 °C printhead, delta motion, and which material to use for each job.

20-35 · Customer story What Koenigsegg prints on the HT90, why they chose it and what it replaced.

35-46 · From part to process Settings, drying and annealing, what typically goes wrong, and cost of ownership.

46-50 · Takeaways and next steps Three takeaways and how to get a sample part or a consultation.

50-60 · Live Q&A Your questions to Prusa and Koenigsegg, including those sent with your registration. All speakers.

## Speakers

Vojtech Tambor

Head of Prusa Biomedical · HT90 expert, Prusa Research

![Vojtech Tambor.](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/https://storage.googleapis.com/prusa3d-content-prod-14e8-asset-manager-prod/fa588604-6a57-4fb1-9852-801283c6dad7.jpg)

Kristian Ljungkvist

Composite Additive Manufacturing Operator, Koenigsegg

![Kristian Ljungkvist.](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/https://storage.googleapis.com/prusa3d-content-prod-14e8-asset-manager-prod/65089268-38f8-4f0a-a447-6e1ba71ee7e9.jpg)

Emir Hamzic

Head of B2B Sales · Host, Prusa Research

![Emir Hamzic.](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/https://storage.googleapis.com/prusa3d-content-prod-14e8-asset-manager-prod/c1bdd417-c74d-4e77-8c8b-92bee5ca57e1.jpg)

## Who should attend

-   ### Engineering and R&D teams
    
    Automotive, aerospace, energy and machinery.
    
-   ### Teams outsourcing advanced polymers
    
    PEEK, PEKK or ULTEM parts today.
    
-   ### Production engineers
    
    Jigs, fixtures and tooling exposed to heat or chemicals.
    
-   ### Teams comparing systems
    
    Anyone evaluating high-temperature FFF systems.
    

## Free webinar · HT90 × Koenigsegg

Mon 30 Nov 2026 · 16:00 CET · 10:00 a.m. ET · 60 minutes

[Register →](https://zoom.us/webinar/register/WN_K-pljL-wT4asiEiVn7ZhlA#/registration)

## Prusa Pro Webinar Series

-   [Mon 30 Nov · HT90 × Koenigsegg High-performance polymers in-house](https://www.prusa3d.com/p/prusa-pro-ht90-koenigsegg-webinar/)
-   [Mon 7 Dec · AFS × Oak Ridge NL Lights-out production, 24/7](https://www.prusa3d.com/p/prusa-pro-afs-ornl-webinar/)

## FAQ

### Is it free?

Yes. Registration is free and includes the recording.

### Can I ask my own questions?

### Do I need to install anything?
