---
title: "CERN prints parts that go straight into the LHC tunnel | Prusa"
description: "The European Organization for Nuclear Research runs Original Prusa printers across its departments."
url: "https://www.prusa3d.com/p/case-studies/education/cern/"
lang: "en"
---

Education Research

> # “We use 3D printing a lot. It is not just for testing, we also use it to create parts that **go directly into the tunnels** of the Large Hadron Collider.”

 Jonas Kampp Mechatronics engineer at CERN

CERN

 

## CERN case study in numbers

**CERN**, the European Organization for Nuclear Research, was founded in 1954 and is dedicated to studying the fundamental particles that constitute matter. Original Prusa printers run across its departments, and some of what they print goes straight into the tunnel.

-   **12,000+** people at CERN
-   **27 km** the LHC ring
-   **100 m** underground

1954 year of establishment

CERN was **founded in 1954** to study the fundamental particles that constitute matter, and has since earned several Nobel Prizes.

## A 27 kilometer machine that the Earth keeps moving

1.  Problem The Large Hadron Collider, buried **100 meters underground and spanning 27 kilometers**, allows scientists to test theoretical predictions in particle physics. Given the unique size and location, maintaining perfect alignment for experiments is challenging due to the Earth's movements.
2.  Solution CERN engineers design and produce the sensors, control systems, and accelerators to measure and adjust the positions of the large magnets, ensuring precise alignment. Thanks to the scale and complexity, it is only natural that **everything must be custom made**. 3D printing is used extensively, not only for testing but also for creating parts that are installed directly in the tunnels.
3.  Value 3D printing cuts costs with models used directly in the LHC and **speeds up creation of parts for extreme environments**.

![Steel scaffolding and access platforms around a cylindrical experiment barrel at CERN](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/be80c96a-2f31-4d1b-96e7-de22582b030f.jpg)

The ATLAS experiment: here is where the particles colide

## A bead that carries a wire for 200 meters

1.  Problem Distances in a critical part of the LHC are measured by a **fragile wire spanning 200 meters**. Many pieces of equipment utilize fragile fiber optics, which must be safeguarded to prevent sharp bends that could break the fibers and disrupt signals.
2.  Solution **A bead made on an Original Prusa 3D printer** carries the wire and protects it from damage. Around it, printed casings and guides safeguard the optics: the **FSI photodetection module** has a printed component that organizes the optical fibers into neat coils so they never bend sharply. Printed on [Prusa CORE One](https://www.prusa3d.com/p/core-one-plus-business/)
3.  Value These are not models of parts. They are **the parts**, in the tunnel, doing the measuring, printed because at this scale everything is a one off anyway.

![A green circuit board with four orange printed spools holding coiled blue fibre optic cable, and a red printed capsule beside it](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/acfc6e1d-513a-4931-aac5-c3ee7592322a.jpg)

Essential tools used for calibrating the LHC: optical wire safeguard and calibration bead.

## Test it in plastic before you commit the expensive material

1.  Problem New components for the LHC must be thoroughly tested to verify the reliability of tools **before using more expensive materials**.
2.  Solution 3D printing is crucial during the testing phase. An initial feasibility test print for a **Hydrostatic Levelling System sensor** was made to explore the design. A **prototype connector for the Wire Positioning System sensors** went the same way. Printed **tubing connectors** are made custom and stay easily modifiable, a property that a machined part loses the moment it exists. Printed with [Prusament PETG](https://www.prusa3d.com/category/petg/)
3.  Value Often, these printed models are even used as final products. It **reduces expensive material usage in prototype testing**, and produces **final use prototypes quickly for high stakes projects**.

![Two hands holding a yellow printed cylindrical part with a honeycomb interior](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/f6da5531-5c14-4917-b46c-39b788442a93.jpg)

Print and tune, then use CNC, prototype of Hydrostatic Levelling System prototype.

## Changing the sample without turning the beam off

1.  Problem CERN’s **CLEAR** accelerator aims a radiation beam at cancer cells for cancer treatment research. The experiment needs **rapid sample changes**, and with radiation in the room, human safety comes first. The **VITO** project has the same problem in a different shape: liquid samples in a **high vacuum setting**, where opening and closing the equipment to change one costs time.
2.  Solution At **IdeaSquare**, a workshop that connects scientific innovation with societal needs, a **3D printed robotic solution** was developed to swap the samples efficiently and safely without interrupting the beam. For VITO, a special holder and a **3D printed 8 mm capillary** let the samples change without stopping the experiment. Printed on [Original Prusa MK4S](https://www.prusa3d.com/product/original-prusa-mk4s/)
3.  Value The beam keeps running, the people stay out of the room, and the experiment stops waiting for its own housekeeping.
    
    “3D printing allows scientists and engineers to quickly create prototypes and push the boundaries of what is possible.”
    
    Dina Zimmermann, Structural engineer at IdeaSquare, CERN 

![A black printed two finger gripper on a linear rail lowering a white printed sample holder into a clear tank](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/acc11fe1-c505-4782-9f63-d6c7b362aaa9.jpg)

This is how the robot switches the samples.

## Could your lab print the part instead of waiting for it?

Tell us what you are building. We will come back with the machines, the materials and the parts other research groups print first.

-   Free, no commitment, quick answer from our sales team

## Still not sure where 3D printing fits your lab?

See what other organizations print, a classroom, a hangar, a car plant, a trauma center.

[Browse all stories by industry or application](https://www.prusa3d.com/p/case-studies/)

![3D-printed house model by ETH students](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/28ffe7f9-4f66-49a8-ab71-2370a4b09f39.jpg)

Customer story ETH Zurich

## Every one of ETH Zurich’s 100+ printers was built by a student

The architecture department’s HYTAC programme trains 300+ students a term, and each of them assembles an Original Prusa kit in two days before printing anything. It started as a maintenance problem: the university could fund the machines, but not the people to keep them running.

-   **100+** Original Prusa printers
-   **300+** students trained per term
-   **20** printers replaced each year

> “I cannot imagine a world without 3D printing. It just would not work!”

 Jonathan Benhamu Founder of HYTAC and lecturer at ETH Zurich

![Logo of ETH Zurich](https://assets.prusa3d.com/cdn-cgi/image/width=200,quality=85,format=auto/https://storage.googleapis.com/prusa3d-content-prod-14e8-asset-manager-prod/e79c8c1a-0a43-479b-bb1a-ee58de27c33c.png)

1 / 4

## Your team’s questions, answered

What researchers and engineers usually ask before deploying printed parts.

### Research Engineer

Prototyping and final use

### Are 3D printed models only used for testing?

### Lead Scientist

Extreme environments

### Can printed parts handle the demands of a particle physics lab?

### Facility Manager

Customization

### Why not use standard off the shelf components?
