---
title: "CERNはLHCトンネルに直接設置される部品をプリントしています"
description: "The European Organization for Nuclear Research runs Original Prusa printers across its departments."
url: "https://www.prusa3d.com/ja/p/case-studies/education/cern/"
lang: "ja"
---

Education Research

> # “私たちは3Dプリントを多用しています。テストのためだけでなく、大型ハドロン衝突型加速器のトンネルに**直接設置される**部品の製造にも使用しています。”

 Jonas Kampp Mechatronics engineer at CERN

CERN

 

## CERN case study in numbers

**CERN**（欧州原子核研究機構）は1954年に設立され、物質を構成する素粒子の研究に専念しています。Original Prusa プリンターは各部門で稼働しており、プリントされたものの一部は直接トンネルに送られます。

-   **12,000+** people at CERN
-   **27 km** the LHC ring
-   **100 m** underground

1954 year of establishment

CERN was **founded in 1954** to study the fundamental particles that constitute matter, and has since earned several Nobel Prizes.

## A 27 kilometer machine that the Earth keeps moving

1.  問題 大型ハドロン衝突型加速器は、**地下100メートルに埋設され、27キロメートルにわたって広がり**、科学者が素粒子物理学の理論的予測を検証することを可能にします。その独自の規模と場所を考えると、地球の動きにより、実験のための完璧なアライメントを維持することは困難です。
2.  解決策 CERNのエンジニアは、大型磁石の位置を測定および調整し、正確なアライメントを確保するためのセンサー、制御システム、および加速器を設計および製造しています。その規模と複雑さから、**すべてをカスタムメイドする**のは当然のことです。3Dプリントは、テストだけでなく、トンネルに直接設置される部品の製造にも広く利用されています。
3.  価値 3Dプリントは、LHCに直接使用されるモデルのコストを削減し、**極限環境向け部品の製造を加速します**。

![Steel scaffolding and access platforms around a cylindrical experiment barrel at CERN](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/be80c96a-2f31-4d1b-96e7-de22582b030f.jpg)

The ATLAS experiment: here is where the particles colide

## A bead that carries a wire for 200 meters

1.  問題 LHCの重要な部分の距離は、**200メートルにわたる壊れやすいワイヤー**で測定されます。多くの機器は壊れやすい光ファイバーを利用しており、ファイバーが鋭く曲がって信号が途絶えるのを防ぐために保護する必要があります。
2.  解決策 **Original Prusa 3Dプリンターで作られたビーズ**がワイヤーを運び、損傷から保護します。その周りには、プリントされたケーシングとガイドが光学部品を保護します。**FSI光検出モジュール**には、光ファイバーをきれいにコイル状に整理し、鋭く曲がらないようにするプリント部品があります。 プリントに使用 [Prusa CORE One](https://www.prusa3d.com/ja/p/core-one-plus-business/)
3.  価値 これらは部品のモデルではありません。これらはトンネル内で測定を行う**部品そのもの**であり、この規模ではすべてが一点物であるためプリントされています。

![A green circuit board with four orange printed spools holding coiled blue fibre optic cable, and a red printed capsule beside it](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/acfc6e1d-513a-4931-aac5-c3ee7592322a.jpg)

Essential tools used for calibrating the LHC: optical wire safeguard and calibration bead.

## Test it in plastic before you commit the expensive material

1.  Problem LHCの新しい部品は、**より高価な材料を使用する前に**、ツールの信頼性を検証するために徹底的にテストする必要があります。
2.  Solution 3Dプリントはテスト段階で非常に重要です。**静水準システムセンサー**の最初の実現可能性テストプリントは、設計を検討するために作成されました。**ワイヤー位置決めシステムセンサー用のプロトタイプコネクタ**も同様でした。プリントされた**チューブコネクタ**はカスタムメイドされ、簡単に変更可能であり、これは機械加工された部品が存在した瞬間に失われる特性です。 Printed with [Prusament PETG](https://www.prusa3d.com/category/petg/)
3.  Value 多くの場合、これらのプリントモデルは最終製品としても使用されます。これにより、**プロトタイプテストにおける高価な材料の使用が削減され**、**高リスクプロジェクト向けの最終用途プロトタイプが迅速に製造されます**。

![Two hands holding a yellow printed cylindrical part with a honeycomb interior](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/f6da5531-5c14-4917-b46c-39b788442a93.jpg)

Print and tune, then use CNC, prototype of Hydrostatic Levelling System prototype.

## Changing the sample without turning the beam off

1.  Problem CERNの**CLEAR**加速器は、がん治療研究のため、がん細胞に放射線ビームを照射します。この実験には**迅速なサンプル交換**が必要であり、室内に放射線があるため、人間の安全が最優先されます。**VITO**プロジェクトも同様の問題を抱えていますが、形が異なります。**高真空環境**にある液体サンプルで、サンプルを交換するために装置を開閉すると時間がかかります。
2.  Solution 科学的イノベーションと社会のニーズを結びつけるワークショップである**IdeaSquare**では、ビームを中断することなくサンプルを効率的かつ安全に交換するための**3Dプリントロボットソリューション**が開発されました。VITOの場合、特別なホルダーと**3Dプリントされた8mmキャピラリー**により、実験を中断することなくサンプルを交換できます。 Printed on [Original Prusa MK4S](https://www.prusa3d.com/ja/product/original-prusa-mk4s-3d-2/)
3.  Value The beam keeps running, the people stay out of the room, and the experiment stops waiting for its own housekeeping.
    
    “3D printing allows scientists and engineers to quickly create prototypes and push the boundaries of what is possible.”
    
    Dina Zimmermann, Structural engineer at IdeaSquare, CERN 

![A black printed two finger gripper on a linear rail lowering a white printed sample holder into a clear tank](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/acc11fe1-c505-4782-9f63-d6c7b362aaa9.jpg)

This is how the robot switches the samples.

## Could your lab print the part instead of waiting for it?

Tell us what you are building. We will come back with the machines, the materials and the parts other research groups print first.

-   Free, no commitment, quick answer from our sales team

## Still not sure where 3D printing fits your lab?

See what other organizations print, a classroom, a hangar, a car plant, a trauma center.

[Browse all stories by industry or application](https://www.prusa3d.com/ja/p/case-studies/)

![3D-printed house model by ETH students](https://assets.prusa3d.com/cdn-cgi/image/width=1200,quality=85,format=auto/28ffe7f9-4f66-49a8-ab71-2370a4b09f39.jpg)

Customer story ETH Zurich

## Every one of ETH Zurich’s 100+ printers was built by a student

The architecture department’s HYTAC programme trains 300+ students a term, and each of them assembles an Original Prusa kit in two days before printing anything. It started as a maintenance problem: the university could fund the machines, but not the people to keep them running.

-   **100+** Original Prusa printers
-   **300+** students trained per term
-   **20** printers replaced each year

> “I cannot imagine a world without 3D printing. It just would not work!”

 Jonathan Benhamu Founder of HYTAC and lecturer at ETH Zurich

![Logo of ETH Zurich](https://assets.prusa3d.com/cdn-cgi/image/width=200,quality=85,format=auto/https://storage.googleapis.com/prusa3d-content-prod-14e8-asset-manager-prod/e79c8c1a-0a43-479b-bb1a-ee58de27c33c.png)

1 / 4

## Your team’s questions, answered

What researchers and engineers usually ask before deploying printed parts.

### Research Engineer

Prototyping and final use

### Are 3D printed models only used for testing?

### Lead Scientist

Extreme environments

### Can printed parts handle the demands of a particle physics lab?

### Facility Manager

Customization

### Why not use standard off the shelf components?
